首页  科学研究  学术论文  2012年
 
Cai YB, Xu XL, et al. (2012) Fibers And Polymers 13(7), 837-845.
文章来源:SKLFS    作者:SKLFS    发布时间:2013-09-21
Cai YB, Xu XL, et al. (2012) Effects of Carbon Nanotubes on Morphological Structure, Thermal and Flammability Properties of Electrospun Composite Fibers Consisting of Laurie Acid and Polyamide 6 as Thermal Energy Storage Materials. Fibers And Polymers 13(7), 837-845. [In English]
Web link: http://dx.doi.org/10.1007/s12221-012-0837-x
Keywords: Ultrafine composite phase change fibers; Electrospinning; Structural; morphology; Phase change behaviors; Thermal stability; Flammability; Thermal conductivity; phase-change materials; glycol/cellulose acetate composite; form-stable; pcm; nanofibers; blends; conductivity; graphite
Abstract: The ultrafine composite fibers consisting of lauric acid (LA) and polyamide 6 (PA6) as form-stable phase change materials (PCMs), were prepared successfully by electrospinning. The effect of carbon nanotubes (CNTs) on the structural morphology, phase change behaviors, thermal stability, flammability and thermal conductivity properties of electrospun LA/PA6 composite fibers was investigated by field-emission scanning electron microscopy (FE-SEM), differential scanning calorimetry (DSC), thennogravimetric analyses (TGA), microscale combustion calorimeter (MCC) and melting/freezing times measurements, respectively. SEM observations indicated that the LA/PA6 and LA/PA6/CNTs composite fibers possessed flat and ribbon-shaped morphologies, but the neat PA6 fibers had cylindrical shape with smooth surface; and the average fiber diameters for LA/PA6 composite fibers decreased generally with the addition of CNTs. DSC measurements indicated that the heat enthalpies of the composite fibers were lower that that of neat LA powders, while the amounts of CNTs had no appreciable effect on the phase change temperatures and heat enthalpies of the composite fibers. TGA results showed that the addition of CNTs increased the onset thermal degradation temperature, maximum weight loss temperature and charred residue at 700 degrees C of the composite fibers, attributed to the improved thermal stability properties. It could be found from MCC tests that there were two-step combustion processes for composite fibers, and corresponded respectively to combustion of LA and polymer chains (PA6) in composite fibers. The addition of CNTs reduced the peak of heat release rate (PHRR) of electrospun composite fibers, contributing to the decreased flammability properties. The improved thermal conductivity performances of LA/PA6/CNTs composite fibers was also confirmed by comparing the melting/freezing times of LA/PA6 composite fibers with that of neat LA powders. The results from the SEM observation showed that the composite fibers had no appreciable variations in shape and diameter after heating/cooling processes.
 
 
相关链接
Cai YB, Xu XL, et al. (2012) Fibers And Polymers 13(7), 837-845.
联系我们
安徽省合肥市金寨路96号
中国科学技术大学
火灾科学国家重点实验室
邮政编码:230026
   
Tel:(+86)551 63601651
Fax:(+86)551 63601669
E-mail:sklfs@ustc.edu.cn
Copyright © 1990-2011 State Key Laboratory of Fire Science, University of Science and Technology of China
火灾科学国家重点实验室 版权所有 皖ICP备:002106505 号